Lozuki for Sale The car will be sold as a roller with full suspension, finished bodywork, windshield, Panasports, new tires, and finished running lights, brake and turn signals. It will accommodate many drivetrain choices, from motorcycle thru four cylinder automobile. Currently it's prepped for a VW Type IV/Hewland combo, and will come with motor mounts, half-shafts and CV joints. Also, with original Lola logbooks and Lola 440 chassis plate. Suspension Magnesium Lola rear uprights with new bearings, springs and rebuilt Koni 8211 fully adjustable shocks with threaded spring perches. Front Lola uprights and same spec Konis. Steering by a Jack Knight magnesium rack and removable steering wheel. Wheels are Panasport 3-piece lightweight 13x6 and 13x9, and new tires. Frame Mild steel, 1"x2" and 3/4"x3/4" tubing, with 16 ga. riveted aluminum floor pan and front box section. Body Fiberglass, hand laid, sealed inside with satin black gel coat, and painted with PPG Deltron 2000 base/clearcoat, hand sanded and polished. I have too many projects, too little space and $$$, so will sell for $12,500. The four suspension corners alone will cost $8,000 to replace (see the Mamba Motorsports 23 roller for around $30k.) CONTACT AT: tomandgretch@charter.net or 231 946-0724. PHOTOS: |
Copyright 2008 Birchwood Design |
Lozuki for Sale The car will be sold as a roller with full suspension, finished bodywork, windshield, Panasports, new tires, and finished running lights, brake and turn signals. It will accommodate many drivetrain choices, from motorcycle thru four cylinder automobile. Currently it's prepped for a VW Type IV/Hewland combo, and will come with motor mounts, half-shafts and CV joints. Also, with original Lola logbooks and Lola 440 chassis plate. Suspension Magnesium Lola rear uprights with new bearings, springs and rebuilt Koni 8211 fully adjustable shocks with threaded spring perches. Front Lola uprights and same spec Konis. Steering by a Jack Knight magnesium rack and removable steering wheel. Wheels are Panasport 3-piece lightweight 13x6 and 13x9, and new tires. Frame Mild steel, 1"x2" and 3/4"x3/4" tubing, with 16 ga. riveted aluminum floor pan and front box section. Body Fiberglass, hand laid, sealed inside with satin black gel coat, and painted with PPG Deltron 2000 base/clearcoat, hand sanded and polished. I have too many projects, too little space and $$$, so will sell for $12,500. The four suspension corners alone will cost $8,000 to replace (see the Mamba Motorsports 23 roller for around $30k.) CONTACT AT: tomandgretch@charter.net or 231 946-0724. PHOTOS: |
